толеранција

толеранција

1) The range between two limiting sizes as a means of specifying the degree of accuracy. 2) The amount a given bearing dimension may vary from specifications. 3) The difference between the upper and lower limits of a dimension or a specification. 4) A means of specifying the degree of accuracy.

0 0

Melhorar

Adicionar uma imagem

Categoria gramatical: noun
Sinónimo(s):
Blossary:
Actividade/ Sector: Machine tools
Category: Bearings
Company: Timken
Produto:
Acrónimos-abreviatura:

Adicionar ao meu Glossário

Outras línguas:

Termos relacionados

хабање

Machine tools; Bearings

Damage resulting from the removal of materials from surfaces in relative motion. Wear is generally described as: : Abrasive: Removal of materials from surfaces in relative motion ...

заштитни омот

Machine tools; Bearings

A metal cap that fits over the outer end of the hub to keep grease in and dirt out of the bearing assembly.

топлотно ширења

Machine tools; Bearings

The expansion caused by the increase in temperature. This may be linear or volumetric.

статична тачке

Machine tools; Bearings

The section of the helix seal lip incorporating the contact line.

штит

Machine tools; Bearings

A metal formed washer attached to the outer ring and set so it rides close to, but not contacting, the inner ring, to retain lubricant and prevent contamination.

оксидација

Machine tools; Bearings

This occurs when oxygen attacks petroleum fluids. The process is accelerated by heat, light, metal catalysts and the presence of water, acids, or solid contaminants. It leads to ...

Terms in the News

Featured Terms

Marijana Dojčinović

0
Terms
0
Glossários
17
Followers

Actividade/ Sector: Anatomy Category: Cytology

ćelije

Ćelije su osnovne funkcionalne jedinice života (svi živi organizmi su sačinjeni od ćelija). Otkrio ih je Robert Huk 1665. god. Reč ćelija potiče od ...